Difference between revisions of "FS Analysis"
(Created from ref_fs.txt.)
|Line 303:||Line 303:|
Revision as of 06:29, 15 January 2014
NOTE: This content was copied from the 'ref_fs.txt' file that comes with TSK. It needs to be re-organized on the wiki.
Currently, evidence is most frequently found in the file system. This is because it is non-volatile and remnants of deleted files can typically be found. This file will help one to use the low-level tools in The Sleuth Kit for a forensic analysis.
This document is organized into small scenarios, which provide examples of how to use The Sleuth Kit. Most of these functions are automated with Autopsy, but they are here for reference and education.
The techniques used here apply to both UNIX and Windows file systems.
The steps from the timeline Sleuth Kit Implementation Notes are followed and you notice some interesting activity from unallocated inodes, namely MFT Entry 5035 from image c_drive.dd. To display the contents of this file, use icat:
# icat images/c_drive.dd 5035 | less
NOTE: To prevent your terminal from getting messed up, pipe all output of "icat" through a pager like "less".
In this scenario, we will search the unallocated space of the "wd0e.dd" image for the string "abcdefg". The first step is to extract the unallocated disk units using the blkls tool (as this is an FFS image, the addressable units are fragments).
# blkls images/wd0e.dd > output/wd0e.blkls
Next, use the UNIX strings(1) utility to extract all of the ASCII strings in the file of unallocated data. If we are only going to be searching for one string, we may not need to do this. If we are going to be searching for many strings, then this is faster. Use the '-t d' flags with "strings" to print the byte offset that the string was found.
# strings -t d output/wd0e.blkls > output/wd0e.blkls.str
Use the UNIX grep(1) utility to search the strings file.
# grep "abcdefg" output/wd0e.blkls.str | less 10389739: abcdefg
We notice that the string is located at byte 10389739. Next, determine what fragment. To do this, we use the fsstat tool:
# fsstat openbsd images/wd0e.dd <...> CONTENT-DATA INFORMATION -------------------------------------------- Fragment Range: 0 - 266079 Block Size: 8192 Fragment Size: 1024
This shows us that each fragment is 1024 bytes long. Using a calculator, we find that byte 10389739 divided by 1024 is 10146 (and change). This means that the string "abcdefg" is located in fragment 10146 of the blkls generated file. This does not really help us because the blkls image is not a real file system. To view the full fragment from the blkls image, we can use dd:
# dd if=images/wd0e.dd bs=1024 skip=10146 count=1 | less
Next, we will identify where this fragment is in the original image. The blkcalc tool will be used for this. "blkcalc" will return the "address" in the original image when given the "address" in the blkls generated image. (NOTE, this is currently kind of slow). The '-u' flag shows that we are giving it an blkls address. If the '-d' flag is given, then we are giving it a dd address and it will identify the blkls address.
# blkcalc -u 10146 images/wd0e.dd 59382
Therefore, the string "abcdefg" is located in fragment 59382. To view the contents of this fragment, we can use "blkcat".
# blkcat images/wd0e.dd 59382 | less
To make more sense of this, let us identify if there is a meta data structure that still has a pointer to this fragment. This is achieved using ifind. The '-a' argument means to find all occurrences.
# ifind -a images/wd0e.dd 59382 493
Inode 493 has a pointer to fragment 59382. Let us get more information about inode 493, using istat.
# istat images/wd0e.dd 493 inode: 493 Not Allocated uid / gid: 1000 / 1000 mode: rw------- size: 92 num of links: 1 Modified: 08.10.2001 17:09:49 (GMT+0) Accessed: 08.10.2001 17:09:58 (GMT+0) Changed: 08.10.2001 17:09:49 (GMT+0) Direct Blocks: 59382
Next, let us find out if there is a file that is still associated with this (unallocated) inode. This is done using ffind.
# ffind -a images/wd0e.dd 493 * /dev/.123456
The leading '*' identifies the file as deleted. Therefore, at one point, the file '/dev/.123456' allocated inode 493, which allocated fragment 59382, which contained the string "abcdefg".
If "ffind" returned with more than file that had allocated inode 493, it means that either both were hard-links to the same file or that one file (chicken) allocated the inode, it was deleted, a second file (egg) allocated it, and then it was deleted. The string belongs to the second file, but it is difficult to determine which came first. On the other hand, if "ffind" returns with two entries where one deleted and one not, then the string belongs to the non-deleted file.
As previously mentioned, Autopsy will do all of this for you when you do a keyword search of unallocated space.
To view all of the deleted file names in an image, use the fls tool. For all deleted files, use the '-r' flag for recursive and '-d' flag for deleted.
# fls -rd images/hda9.dd | less d/d * 232: /TEMP-823450 r/d * 293: /TEMP-131100
This shows us the full path that the deleted files are located. On some systems, such as Windows NTFS, the file content may be recovered (depending on how much system activity has occurred). On other systems, such as Solaris UFS and Linux Ext3, deleted files can not be easily recovered. The number at the beginning of the line is the inode number. The '*' shows that it is deleted and the 'd' and 'r' show the type (directory and file). The first letter identifies the directory entry type value (which does not exist in all file system types) and the second letter is the type according to the inode. In most cases these should be the same, but it may not for deleted files if the inode has been reallocated to a file of a different type. If we do an "istat" on the directory (232) we will notice that the size is 0.
# istat images/hda9.dd 232 inode: 232 Not Allocated uid / gid: 0 / 0 mode: rwxr-xr-x size: 0 num of links: 0 Modified: 08.23.2001 21:52:33 (GMT+0) Accessed: 08.23.2001 23:05:39 (GMT+0) Changed: 08.23.2001 21:52:33 (GMT+0) Deleted: 08.23.2001 23:05:39 (GMT+0) Direct Blocks:
Linux does this to all of its deleted directories. It should also be observed that no block addresses are shown in the "istat" output. This is because the size is 0 and the program thinks that the address is bogus. Using the '-b' option of "istat", we can force it to output the block address. With Linux Ext3, the block pointers would be 0, but Linux Ext2 kept the old addresses.
# istat -b 2 images/hda9.dd 232 inode: 232 Not Allocated uid / gid: 0 / 0 mode: rwxr-xr-x size: 0 num of links: 0 Modified: 08.23.2001 21:52:33 (GMT+0) Accessed: 08.23.2001 23:05:39 (GMT+0) Changed: 08.23.2001 21:52:33 (GMT+0) Deleted: 08.23.2001 23:05:39 (GMT+0) Direct Blocks: 388 0
Now we can examine the contents of block 388 and see the file names that were in that directory:
# blkcat -h images/hda9.dd 388 | less
Manual Deleted File Recovery
A UFS/FFS or EXT2FS/EXT3FS file system is organized into groups. Each group has its own inodes and blocks to store data in. When a new file is created, it is given an inode in the same group that the parent directory inode is in (if there are still inodes available). When a new directory is created, it is given an inode in a new group. An inode allocates blocks from the same group that its inode is in.
When recovering a file from one UFS or EXTxFS, the group layout can be used. When a deleted file is found with 'fls', notice the inode of the parent directory:
# fls -r images/hda1.dd d/d 30789: doc + r/r * 0: doc/.a/ssh.tar + r/r 30792: doc/.a/install <...>
We want to recover the 'ssh.tar' file and notice that the parent directory is 30789 and the deleted file has a cleared inode pointer. To identify the group that it is in, the 'fsstat' tool is used:
# fsstat images/hda1.dd FILE SYSTEM INFORMATION -------------------------------------------- File System Type: EXT3FS <...> Group: 0: Inode Range: 1 - 15392 Block Range: 0 - 32767 Super Block: 0 - 0 Group Descriptor Table: 1 - 1 Data bitmap: 2 - 2 Inode bitmap: 3 - 3 Inode Table: 4 - 484 Data Blocks: 485 - 32767 Group: 1: Inode Range: 15393 - 30784 Block Range: 32768 - 65535 Super Block: 32768 - 32768 Group Descriptor Table: 32769 - 32769 Data bitmap: 32770 - 32770 Inode bitmap: 32771 - 32771 Inode Table: 32772 - 33252 Data Blocks: 33253 - 65535 Group: 2: Inode Range: 30785 - 46176 Block Range: 65536 - 98303 Data bitmap: 65536 - 65536 Inode bitmap: 65537 - 65537 Inode Table: 65540 - 66020 Data Blocks: 65538 - 65539, 66021 - 98303 <...>
The inode is in the range of inode addresses for group 1. To search for the deleted file, we extract the unallocated space using 'blkls':
# blkls images/hda1.dd 32768-65535 > output/hda1-grp1.blkls
If we wanted to extract all of the data for the group, we could use 'dd':
# dd if=images/hda1.dd of=output/hda1-grp1.dd bs=4096 skip=32768 \ count=32767
Where, the fragment size is 4096 (which can also be found in the 'fsstat' output). Either of these images can then be analyze for keywords or using other data carving tools such as 'foremost'. This process allows one to reduce the amount of data that must be analyzed.