Istat
From SleuthKitWiki
Back to Help Documents
istat
Version 2.09
Purpose
Displays the uid, gid, mode, size, link number, modified, accessed, changed times, and all the disk units a structure has allocated.
Usage
istat [-b num ] [-f fstype ] [-i imgtype] [-o imgoffset] [-vV] [-z zone] [-s seconds ] image [images] inode
Options
| Switch | Purpose |
|---|---|
| -b num | Display the addresses of num disk units. Useful when the inode is unallocated with size 0, but still has block pointers. |
| -f fstype | Specify the file system type. Use the -? option for supported types. If not given, the default type for the platform is used. |
| -s seconds | The time skew of the original system in seconds. For example, if the original system was 100 seconds slow, this value would be -100. |
| -i imgtype | Identify the type of image file, such as raw or split. Raw is the default. |
| -o imgoffset | The sector offset where the file system starts in the image. Non-512 byte sectors can be specified using ’@’ (32@2048). |
| -v | Verbose output of debugging statements to stderr |
| -V | Display version |
| -z zone | An ASCII string of the original system’s time zone. For example, EST5EDT or GMT. These strings are defined by the operating system and may vary. NOTE: This has changed since TCTUTILs. |
| image [images] | One (or more if split) disk or partition images whose format is given with ’-i’. |
| inode | Meta-data number to display stats on |
Example
No example available.
History
istat first appeared in TCTUTILs v1.0.
Author
Brian Carrier <carrier@sleuthkit.org>
